Roll Grooving Machine TWG-IIA-P

TWG-IIA-P roll grooving machine is designed for the 2” -12” plastic-lining steel pipe. The result-oriented design of roller ensures the plastic-lining without burst and the end of plastic-lining without flare.

Categoria de produto:

Máquina de grooving de rolo

Tel：

Email：

palavra-chave:

plastic-lining steel pipes

roll groover

grooved piping connection

Descrição do Produto

PRODUCT INTRODUCTION

● TWG-IIA-P roll grooving machine is designed for grooving 2"-12 plastic-lining steel pipe.

● Unique integral hydraulic pump structure and adjustable stoke limitation device ensure easy, accurate and high performance working.

● Fast and economical feed of the pressure roller with oil-hydraulic pressure cylinder.

● Equipped with result-oriented design of rollers ensure the plastic lining no damage after grooving operation.

PRODUCT SPECIFICATIONS

● Capacity : 2"-12"(Φ 60-Φ 325)SCH30 plastic-lining steel pipe

● Max. wall thickness: 8mm (Excluding the thickness of plastic-lining)

● Output RPM: 23rpm

● G. W: 180kgs

● Packaging size: 78x72x92(cm)

roll grooving machine TWG-IIA-P

Standard Equipment
*For SCH30 plastic-lining steel pipe
Art. No.	Description	N.W(kgs)	Ref No.
09.02.031	Pipe stand	18	(1)
03.01.04.004	Knurl wheel Φ 60-Φ 89	0.535	(2)
03.01.04.003	Knurl wheel Φ 108-Φ 140	2.485	(3)
03.01.04.001	Knurl wheel Φ 159-Φ 168	5.945	(4)
03.01.04.002	Knurl wheel Φ 219-Φ 325	5.71	(5)
03.01.04.010	Pinch roller Φ 60-Φ 168	1.065	(6)
03.01.04.011	Pinch roller Φ 219-Φ 325	1.075	(7)

the standard equipment of roll grooving machine TWG-IIA-P

Motor Parameter
Phase	Voltage	Frequency
Single Phase	110 / 120 / 220 / 230 / 240V	50/60 Hz
Three Phase	220 /380 / 415 / 440V	50/60 Hz

TROUBLESHOOTING

Problem	Causes	Solutions
No pressure in the oil cylinder. No action resulted from turning the handle.	1. Insufficient hydraulic oil.	Add hydraulic oil.
	2. Dirt oil blocks the hole.	Replace the hydraulic oil, clean the oil net.
	3. Leakage occurs to the check valve.	Remove the screws and spring. Knock the small steel balls lightly to force out the airtight surface.
The piston will move forward when the handle is forced downward, but it will return when the handle is released.	1. Dirt oil blocks the hole.	Replace the hydraulic oil.
	2. Leakage occurs to the check valve.	Remove the screws and spring. Knock the small steel balls lightly to force out the airtight surface.
	3. Leakage occurs to other position.	Trace the problem and correct.
Insufficient oil cylinder pressure.	The spring of safety valve breaks down.	Replace the safety valve .
The pipe escapes.	1. Improper direction and height of bracket.	Vary the direction and height of bracket.
	2. Improper direction of steel pipe.	Toggle the clock-wise / anti-clockwise switch to change the rotation direction of spindle.
	3. Rough end face of steel pipe.	Grind the end face.