Roll Grooving Machine TWG-IVZ

TWG-IVZ automatic hydraulic roll grooving machine is equipped with control panel, is simple and easy to operate it. The automatic hydraulic control system and auto-feeding to improve the efficiency. It’s a good choice for the big diameter steel pipe to be grooved.

Categoria de produto:

Máquina de grooving de rolo

Tel：

Email：

palavra-chave:

roll grooving machine

semi-automatic

automatic groover

Descrição do Produto

PRODUCT INTRODUCTION

● TWG-IVZ automatic hydraulic roll grooving machine is designed for grooving 8”-24”steel pipe.

● Equipped with Automatic hydraulic control system and auto-feeding to improve

the efficiency.

● Semi-automatic process, more precise grooves and more efficient.

● Designed auto delay function to make every single groove depth very precise.

● Equipped with solid wheels at the bottom of the machine, it is easy to transport in different building sites.

PRODUCT SPECIFICATIONS

● Capacity: 8"-24"(Φ 219-Φ 630)SCH40 steel pipe.

● Max. wall thickness: 13mm.

● Output RPM: 15rpm.

● G. W: 490kgs.

● Packaging size: 107x85x168(cm).

98x98x63(cm).

Roll Grooving Machine TWG-IVZ

Standard Equipment
*For SCH40 steel pipe
Art. No.	Description	N.W(kgs)	Ref No.
03.01.06.020	Pipe stand	140	(1)
03.01.06.020	Knurl wheel Φ 219-Φ 325	9	(2)
03.01.06.021	Knurl wheel Φ 377-Φ 426	8.675	(3)
03.01.06.022	Knurl wheel Φ 480-Φ 630	8.515	(4)
03.01.06.015	Pinch roller Φ 219-Φ 530	1.29	(5)
03.01.06.016	Pinch roller Φ 630	1.32	(6)
09.02.032	Foot switch	1.2	(7)

Motor Parameter
Phase	Voltage	Frequency
Three Phase	220 /380 / 415 / 440V	50/60 Hz

PRODUCT TRANSPORT

The four feet of the machine touch the ground and the four universal casters keep off the ground upon unpacking. (Refer to Fig. 1.). The hoisting status is as shown in fig. 2. In case a small moving is intended, loosen the four nuts as shown in Fig. 1,rotate the screws on the four legs to move the legs upward and enable the casters touch the ground to facilitate the moving of machine.