Grooving production line TWG-14
This is a grooving production line for pipe mills to make piping prefabrication. It is designed for 8inch to 24inch pipe, It is a good production line for big pipe processing.
Categoria de produto:
Tel：
Email：
palavra-chave:
grooving production line
piping prefabrication
Descrição do Produto
PRODUCT INTRODUCTION
● This is a grooving production line for pipe mills to make piping prefabrication.
● It is designed for pipe with big diameter up to 24inch
● Equipped with magnetic grid ruler, make the groove more accurate.
● PLC control system, make the operation more convenient.
PRODUCT SPECIFICATIONS
● Max. pipe O.D: DN600mm
● Min. pipe O.D: DN200mm
● Max. wall thickness: 12.7mm
● Pipe length: 6-12m
● Oil pump motor: three phase、380V、15KW
● Tank volume: 380L
● Flux-adjustment range: 1-125L/min
● Pressure-adjustment range: 14-210kgf/cm2
● Transmission wheel motor speed: Adjustable
● Transmission wheel motor: Three phase 、380V、1.5KW
● Max. oil pump pressure: 11Mpa
● Main shaft motor: 380V、3000W、50HZ
● Main shaft speed: 0~45rpm/min
PRODUCTION VIDEO
Following is the video of the TWG-14A grooving production line working in the pipe prefabrication factory.
Página anterior
Próxima página
Previous page
PRODUTOS RELACIONADOS
2" - 12" Steel Pipe
8 units grooving production line TWXL3-10A
Batch grooving of 3-8 inch pipes
6 units grooving production line TWXL1.5-4A
Batch grooving for 1.5-4 inch pipes
5 units grooving production line TWXL2-8A
Batch grooving for 2-8 inch pipes
Single unit grooving production line TWXL1.5-12A
Automatic grooving for 3-8 inch pipes
PRODUTOS RELACIONADOS
2" - 12" Steel Pipe
Inquérito Agora