+
  • 画板 1 拷贝 16.png
  • 画板 1 拷贝 18.png
  • 画板 1 拷贝 13.png
  • 画板 1 拷贝 14.png

5 units grooving production line TWXL2-8A


This is a grooving production line for pipe mills to make piping prefabrication.There are 5 grooving units on each side, more efficiency.Within one minute, you can get 5 4inch pipes grooved in one time.  


Categoria de produto:

palavra-chave:

roll grooving machine

piping prefabrication

Descrição do Produto

  PRODUCT INTRODUCTION  
 

This is a grooving production line for pipe mills to make piping prefabrication.
There are 5 grooving units on each side, more efficiency.
Within one minute, you can get 5 4inch pipes grooved in one time.  
Equipped with magnetic grid ruler, make the groove more accurate.
Interlocking rolls designed, make the groove more standard.
PLC control system, make the operation more convenient. 

 

TWXL2-8A 5 units grooving production line


  PRODUCT SPECIFICATIONS  

 

Max. pipe O.D: DN50(2")

Min. pipe O.D: DN200(8")

Max. wall thickness: 8MM

Pipe length: 2.8-6M

Max. oil pump pressure: 8MPA

Main shaft motor: Three phase, 380V、1.5KW、50HZ

Oil pump motor: Three phase ,380V、15KW、50HZ

Dimension: 12X16M
 

  PRODUCT VIDEO  

 

Follow is the video of the TWXL2-8A 5 units grooving production line working in the pipe prefabrication factory. 

 

PRODUTOS RELACIONADOS

Grooving production line TWG-14

automatic grooving for large diameter pipe

8 units grooving production line TWXL3-10A

Batch grooving of 3-8 inch pipes

6 units grooving production line TWXL1.5-4A

Batch grooving for 1.5-4 inch pipes

Single unit grooving production line TWXL1.5-12A

Automatic grooving for 3-8 inch pipes

PRODUTOS RELACIONADOS

Inquérito Agora

Enviar