+
  • 画板 1 拷贝 8(2).png
  • 画板 1 拷贝 12(2).png

6 units grooving production line TWXL1.5-4A


This is a grooving production line for pipe mills to make piping prefabrication.There are 6 grooving units on each side, more efficiency.Within one minute, you can get 6 4inch pipes grooved in one time.


Categoria de produto:

palavra-chave:

grooving production line

piping prefabrication

Descrição do Produto

  PRODUCT INTRODUCTION  
 

 This is a grooving production line for pipe mills to make piping prefabrication.
 There are 6 grooving units on each side, more efficiency.
 Within one minute, you can get 6 4inch pipes grooved in one time.  
 Equipped with magnetic grid ruler, make the groove more accurate.
 Interlocking rolls designed, make the groove more standard.
 PLC control system, make the operation more convenient. 

 

TWXL1.5-4A 6 units grooving production line

 

  PRODUCT SPECIFICATIONS  

 

 Max. pipe O.D: DN40(1.5")

 Min. pipe O.D: DN100MM(4")

 Max. wall thickness: 5MM

 Pipe length: 2.8-6.2M

 Max. oil pump pressure: 10MPA

 Main shaft motor: Three phase, 380V、1.1KW、50HZ

 Oil pump motor: Three phase ,380V、15KW、50HZ

 Main shaft: 20~40RPM

 Dimension: 5700X2700X1800MM

 

  PRODUCT VIDEO  

 

Follow is the video of the TWXL1.5-4A 6 units grooving production line working in the pipe prefabrication factory. 

 

PRODUTOS RELACIONADOS

Grooving production line TWG-14

automatic grooving for large diameter pipe

8 units grooving production line TWXL3-10A

Batch grooving of 3-8 inch pipes

5 units grooving production line TWXL2-8A

Batch grooving for 2-8 inch pipes 

Single unit grooving production line TWXL1.5-12A

Automatic grooving for 3-8 inch pipes

PRODUTOS RELACIONADOS

Inquérito Agora

Enviar