+
  • 画板 1 拷贝 2(1).png
  • 画板 1 拷贝 3.png
  • 画板 1 拷贝 11(2).png
  • 画板 1 拷贝 6(3).png

8 units grooving production line TWXL3-10A


This is a grooving production line for pipe mills to make piping prefabrication.There are 8 grooving units on each side, more efficiency. Within one minute, you can get 8 4inch pipes grooved in one time.  


Categoria de produto:

palavra-chave:

grooving production line

piping prefabrication

Descrição do Produto

  PRODUCT INTRODUCTION  
 

● This is a grooving production line for pipe mills to make piping prefabrication.
● There are 8 grooving units on each side, more efficiency.
● Within one minute, you can get 8 4inch pipes grooved in one time.  
● Equipped with magnetic grid ruler, make the groove more accurate.
● Interlocking rolls designed, make the groove more standard.
● PLC control system, make the operation more convenient. 

 

TWXL3-10A 8 units grooving production line

 

 PRODUCT SPECIFICATIONS  

 

● Max. pipe O.D: DN80(3")

 Min. pipe O.D: 250MM(10")

● Max. wall thickness: 9.5MM

 Pipe length: 6-8M

● Max. oil pump pressure: 11MPA

 Main shaft motor: Three phase, 380V、1.5KW、50HZ

● Oil pump motor: Three phase ,380V、15KW、50HZ

 Main shaft speed: 0~45RPM

● Dimension: 4800X3500X1800MM

 

  PRODUCT VIDEO  

 

Follow is the video of the TWXL3-10A 8 units grooving production line working in the pipe prefabrication factory. 

 

PRODUTOS RELACIONADOS

Grooving production line TWG-14

automatic grooving for large diameter pipe

6 units grooving production line TWXL1.5-4A

Batch grooving for 1.5-4 inch pipes

5 units grooving production line TWXL2-8A

Batch grooving for 2-8 inch pipes 

Single unit grooving production line TWXL1.5-12A

Automatic grooving for 3-8 inch pipes

PRODUTOS RELACIONADOS

Inquérito Agora

Enviar